Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this...
Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
Sale price $3899 $38.99
Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]
Sale price $2899 $28.99
Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]
60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]
Sale price $4799 $47.99
![Airmar DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth [DST810PV-N2]](http://www.pointsupplies.com/cdn/shop/products/91294XL_{width}x.jpg?v=1633049595)
![Airmar DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth [DST810PV-N2]](http://www.pointsupplies.com/cdn/shop/products/91294XL_580x.jpg?v=1633049595)
Airmar DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth [DST810PV-N2]
DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly change conventional behavior and...
Airmar DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - Bluetooth [DST810PV-N2]
Sale price $35399 $353.99
Airmar P66 Transom Mount Transducer f/Humminbird 9-Pin Units [P66-DT-HB]
P66 Transom Mount Transducer f/Humminbird 9-Pin UnitsFeatures: Depth and temperature in one housing Plastic kick-up bracket Accommodates transom angles between 2° and 20° Recessed waterflow channel protects paddlewheel Transducer can...
Airmar P66 Transom Mount Transducer f/Humminbird 9-Pin Units [P66-DT-HB]
Sale price $18599 $185.99
Airmar B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20 [B60-20-HB]
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20ºThe bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in,...
Airmar B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20 [B60-20-HB]
Sale price $31199 $311.99
Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]
164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]
Sale price $5899 $58.99
Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]
75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches...
Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]
Sale price $2999 $29.99
Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]
164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For...
Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]
Sale price $4799 $47.99
Airmar Navico 9-Pin Mix Match Chirp Cable - 1M [MMC-9N]
Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide TransducersFeatures: Length: 1M 9-Pin for Med, High, and...
Airmar Navico 9-Pin Mix Match Chirp Cable - 1M [MMC-9N]
Sale price $10599 $105.99
Airmar B175HW Bronze Thru Hull 12 Tilt - 1kW - Requires Mix and Match Cable [B175C-12-HW-MM]
B175HW Bronze Thru Hull 12° Tilt - 1kWRequires Mix and Match CableGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range...
Airmar B175HW Bronze Thru Hull 12 Tilt - 1kW - Requires Mix and Match Cable [B175C-12-HW-MM]
Sale price $1,24699 $1,246.99
Airmar Garmin 8-Pin Mix Match Chirp Cable - 1M [MMC-8G]
Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to...
Airmar Garmin 8-Pin Mix Match Chirp Cable - 1M [MMC-8G]
Sale price $10599 $105.99
Airmar B75H Bronze Chirp Thru Hull 20 Tilt - 600W - Requires Mix and Match Cable [B75C-20-H-MM]
B75H Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or...
Airmar B75H Bronze Chirp Thru Hull 20 Tilt - 600W - Requires Mix and Match Cable [B75C-20-H-MM]
Sale price $68399 $683.99
![Airmar B75HW High Wide Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull [B75C-20-HW-MM]](http://www.pointsupplies.com/cdn/shop/files/103033XL_{width}x.jpg?v=1708991203)
![Airmar B75HW High Wide Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull [B75C-20-HW-MM]](http://www.pointsupplies.com/cdn/shop/files/103033XL_580x.jpg?v=1708991203)
Airmar B75HW High Wide Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull [B75C-20-HW-MM]
B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer...
Airmar B75HW High Wide Chirp Transducer - 20 Degree Deadrise, 600W Thru Hull [B75C-20-HW-MM]
Sale price $83299 $832.99
Airmar TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable [TM165C-HW-MM]
TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides...
Airmar TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter Cable [TM165C-HW-MM]
Sale price $38999 $389.99
B265LH Bronze Chirp Thru Hull 1kW with Fairing BlockRequires Mix and Match CableImagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz,...
Sale price $1,51599 $1,515.99
![Airmar NMEA2000 Cable - 30M [WS2-C30]](http://www.pointsupplies.com/cdn/shop/products/88642XL_{width}x.jpg?v=1616013917)
![Airmar NMEA2000 Cable - 30M [WS2-C30]](http://www.pointsupplies.com/cdn/shop/products/88642XL_580x.jpg?v=1616013917)
Airmar NMEA2000 Cable - 30M [WS2-C30]
NMEA2000 Cable - 30MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector...
Airmar B75M Bronze Chirp Thru Hull 20 Tilt - 600W - Requires Mix and Match Cable [B75C-20-M-MM]
B75M Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or...
Airmar B75M Bronze Chirp Thru Hull 20 Tilt - 600W - Requires Mix and Match Cable [B75C-20-M-MM]
Sale price $68999 $689.99
![Airmar DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12 Tilt - NMEA 2000 - 6M Cable [DT812PV-235-N2]](http://www.pointsupplies.com/cdn/shop/products/88888XL_{width}x.jpg?v=1617900007)
![Airmar DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12 Tilt - NMEA 2000 - 6M Cable [DT812PV-235-N2]](http://www.pointsupplies.com/cdn/shop/products/88888XL_580x.jpg?v=1617900007)
DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them...
Sale price $31699 $316.99
B275C-LHW Bronze Thru-Hull - Low & High Wide FrequencyRequires Mix & Match CableGet more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range...
Sale price $1,99599 $1,995.99
Airmar Transducer
Airmar is a leading manufacturer of marine transducers, which are electronic devices used on boats to measure depth, speed, and other information about the water and the vessel's environment. Airmar produces a wide range of transducers for different types of boats and applications, including fishing, navigation, and research.
Airmar's transducers are known for their high-quality construction, accuracy, and durability. They use advanced technologies such as CHIRP (Compressed High-Intensity Radiated Pulse) to provide more detailed and accurate readings, and they are designed to be easy to install and use.
Some popular Airmar transducers include the B744V, which is a through-hull transducer for measuring depth and speed, and the P66, which is a transom-mount transducer that can also measure water temperature. Airmar also offers transducers with advanced features like side-scanning and 3D imaging.
Overall, Airmar transducers are a popular choice among boaters and are well-regarded for their quality and performance.
Airmar Transducer Guide
Here is a comprehensive guide to Airmar transducers:
-
Transducer types: Airmar offers several types of transducers including through-hull, in-hull, transom-mount, and pocket-mount. The type of transducer you choose depends on your boat's hull design and the type of information you want to measure.
-
Frequency: Airmar transducers operate at different frequencies, which affects their accuracy and range. High-frequency transducers provide more detailed information but have a shorter range, while low-frequency transducers can detect deeper water but may not provide as much detail.
-
Beam angle: The beam angle of a transducer determines the width of the area it can scan. A narrower beam angle provides more detail but covers a smaller area, while a wider beam angle covers a larger area but may not be as detailed.
-
Power output: The power output of a transducer affects its accuracy and range. A higher power output can provide more detailed information and cover a larger area, but may also use more energy.
-
Installation: Airmar transducers can be installed in different ways, including through-hull, in-hull, transom-mount, and pocket-mount. Consider the ease of installation and the impact on your boat's hull design when choosing a transducer.
-
Compatibility: Make sure the Airmar transducer you choose is compatible with your boat's electronics and software. Check with your boat manufacturer or electronics provider to ensure compatibility.
-
Materials: Airmar transducers are made from various materials including plastic, bronze, and stainless steel. Consider the type of water you'll be boating in and your budget when selecting the material for your transducer.
-
Features: Airmar transducers offer various features such as temperature sensors, speed sensors, and CHIRP technology, which provides more detailed information. Consider the features you need for your specific boating activities.
-
Brand reputation: Airmar is a reputable and well-established brand in the marine industry, known for producing high-quality and reliable transducers. Consider the brand's reputation and customer reviews when making your selection.
By considering these factors, you can select an Airmar transducer that meets your specific needs and provides accurate and reliable information about the water and your boat's environment.
Airmar Transducers For Garmin
Airmar produces a wide range of transducers that are compatible with Garmin electronics. Here are some Airmar transducers that are compatible with Garmin:
-
Airmar B175: This through-hull transducer is compatible with Garmin GPSMAP and echoMAP series chartplotters and fishfinders. It operates at frequencies ranging from 80 kHz to 130 kHz and has a beam angle of 20 degrees.
-
Airmar B60: This transom-mount transducer is compatible with Garmin GPSMAP and echoMAP series chartplotters and fishfinders. It operates at frequencies ranging from 50 kHz to 200 kHz and has a beam angle of 45 degrees.
-
Airmar P66: This in-hull transducer is compatible with Garmin GPSMAP and echoMAP series chartplotters and fishfinders. It operates at frequencies ranging from 50 kHz to 200 kHz and has a beam angle of 45 degrees.
-
Airmar TM275LH-W: This transom-mount transducer is compatible with Garmin GPSMAP and echoMAP series chartplotters and fishfinders. It operates at frequencies ranging from 42 kHz to 65 kHz and 150 kHz to 250 kHz, and has a beam angle of 25 degrees.
-
Airmar M265LH: This through-hull transducer is compatible with Garmin GPSMAP and echoMAP series chartplotters and fishfinders. It operates at frequencies ranging from 42 kHz to 65 kHz and 150 kHz to 250 kHz, and has a beam angle of 25 degrees.
Make sure to check the compatibility of the Airmar transducer with your specific Garmin device before making a purchase.